DroneReady
DJI

Mini 4 Pro

DJI Mini 4 Pro specifications and what a UK operator needs to fly it commercially under a PDRA01 operational authorisation.

Published manufacturer specs · UK context

01

Does the Mini 4 Pro fit PDRA01?

The DJI Mini 4 Pro has a published maximum take-off mass of 0.249 kg, which is within the 25 kg limit PDRA01 works to. Mass is necessary but not sufficient: whether a given job fits PDRA01 depends on how you fly it — visual line of sight, height, and distance from uninvolved people.

It also sits in the sub-250-gram category, so lighter Open-category rules may cover some flights without an operational authorisation at all. The free route checker shows which route applies to your operation.

02

Mini 4 Pro specifications

Published manufacturer specifications, used to prefill the aircraft section of the guided form. Confirm each value against your own airframe.

TypeMultirotor
ConfigurationQuadcopter
PropulsionElectric
Flight controllerDJI proprietary flight controller (integrated autopilot)
ControllerDJI RC-N2 or DJI RC 2 (bundle-dependent)
C2 bandDual (2.4 / 5.8 GHz)
BatteryDJI intelligent flight battery — Li-ion, 2590 mAh, 7.32 V, one flight pack
GNSSMulti-constellation
Max take-off mass0.249 kg
Max wind24 mph
Max airspeed16 m/s
Operating temperature-10°C to 40°C
Dimensions298 × 373 × 101 mm (unfolded, with propellers)

Takeoff weight under 249 g — stays in the sub-250-gram category. O4 link on 2.4 + 5.8 GHz. Max wind 10.7 m/s; max speed 16 m/s (Sport). GNSS GPS+Galileo+BeiDou.

03

Flying the Mini 4 Pro commercially

Flying commercially under PDRA01 is less about the aircraft and more about the paperwork and permissions around it. In outline you need:

  • CAA Operator ID. Registered to the operator and displayed on the aircraft.
  • Flyer ID + competence certificate. A Flyer ID for the pilot, plus an RPC-L1 or GVC for PDRA01.
  • Insurance. Third-party cover appropriate to the operation.
  • Operations manual & records. A CAP2606-shaped manual plus logs, risk assessment and checklists.

The how to get PDRA01 guide walks through the full sequence.

Practical answers

Frequently asked questions

Can the DJI Mini 4 Pro be used under PDRA01?

Its published maximum take-off mass (0.249 kg) is within the 25 kg limit PDRA01 works to. Mass is only one factor — whether a specific operation fits PDRA01 depends on how and where you fly, which the free route checker assesses.

What do I need to fly the Mini 4 Pro commercially in the UK?

For a PDRA01 operation you need a CAA Operator ID displayed on the aircraft, a Flyer ID and a remote pilot certificate (RPC-L1 or GVC) for the pilot, suitable insurance, and an operations manual with supporting records.

Are these Mini 4 Pro specifications exact?

They are published manufacturer figures and a starting point. Confirm them against your own airframe, firmware and battery before relying on them — variants and firmware caps differ.

Build your draft pack

Start with the free route check.

Answer a short set of questions, see route warnings, then generate editable PDRA01-style documentation for review. Pick the Mini 4 Pro from the aircraft list and the specs above prefill for you. No authorisation or compliance outcome is guaranteed.

Check the proposed operation →